Maximet 2020
Availability: In Stock
Add to Compare
THE MAXIMET 2020 GOLD DETECTION SYSTEM
The kit contains a small tin of black maxGlo paint to be applied to somewhere invisible in the boot of your car. This need only be about an inch square. It activates your car body glass harmlessly to show gold occurrences by indicating bitumen roads as either violet or blue though our sunglasses. These combine optically with the car's window glass to colour the roads in either blue or violet. Blue indicates gold greater than 30 grams and violet less than 30 grams.
Also provided is a small anemometer or wind speed meter. You attach this to your driver side mirror. The meter has been modified by maxFynd to show different wind speeds depending on the gold the car passes over. The higher the amount of gold the higher the wind speed shown. You can check this as you drive being very careful with road safety in mind. Setting your cruise control to say 40 km/h will work the best. It works best on quiet country roads where traffic is minimal.
One way to mark the areas of most gold is to stop when the wind speed is highest and the road shows blue not violet. Use your smartphone or GPS to tag this point. At the end of the session you could have a dozen points to check, above them with the included Joola angle tool. This gives you depth, type of gold whether natural or man made and weight estimate. It also indicates solar conditions. It must spin twice before readings can be trusted.
The gold epicentre is 20 feet to the right of the color change. This enables goldhunters to get an idea of where the gold reefs lie. These can extend into the distance, easily determined by the Joola. It can enable a map of occurrences to be drawn. You will find these color changes more common around old goldmining zones. No digging below roads is possible of course but the Maximet 2020 allows perfect detection of gold on either side and into the distance.
maxFynd©2020
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: